Mayer & Mayer bonding experts

Static Mixers for F - System	Static Mixers for B - System	Static Mixers for K - System

For the Sulzer Mixpac F system is a wide range of mixers available.		For the Sulzer Mixpac B system is a wide range of mixers available.		For the Sulzer Mixpac K system is a wide range of mixers available.
MFH types:	Helices mixing elements for all 1:1 and 2:1 F system cardridges	MBH types	Helices mixing elements for all 1:1 and 2:1 F system cardridges	MLH types:	Helices mixing elements for all 1:1 and 2:1 F system cardridges
MFHX types:	Helices mixing elements for all 4.1 and 10:1 F system cardridges	MBHX types:	Helices mixing elements for all 4:1 and 10:1 F system cardridges	MLHX types:	Helices mixing elements for all 4:1 and 10:1 F system cardridges
MFQ types:	Quadro mixing elements for all 1:1 and 2:1 F system cardridges	MBQ types:	Quadro mixing elements for all 1:1 and 2:1 F system cardridges
MFQX types:	Quadro mixing elements for all 4:1 and 10:1 F system cardridges	MBQX types:	Quadro mixing elements for all 4:1 and 10:1 F system cardridges

Classic Mixers for System Cardridges and machine Mixers

MHC, MCHX and MGQ types	MEH and MSH types for dispensing machines	MAH, MAHX and MAQ types

The STATOMIX® MC and the MG Series cartridge mixers were developed for the MIXPAC® 200 and MIXPAC® 400 Systems. The unique element design achieves proper mixing with minimal resistance, which is highly beneficial for manually powered dispensing. They are available as:		The STATOMIX® MAH and MAQ Series static mixers feature simple twist-lock mounting. The MA mixers' first element automatically aligns itself precisely with the dividing wall of the MIXPAC® A-50 cartridge, separating Part A and Part B. They are available as:

MCH types:

MCHX types:

MGQ types:

Helices for 1:1 and 2:1 systems (white color)

Helices for 4:1 and 10:1 systems (red color)

Quadro for all ratios (green color)

STATOMIX® ME Series plastic disposable static mixers, when used with meter mix equipment, provide a low cost solution for 2-component mixing. The mixer element is molded of polyacetal to withstand the higher pressures of meter mix machines.

The properties of the mixing elements of the blue ME and the yellow MS types are the same. Difference is only in the diameter of the bellmouth section which fits to the different machine intersection standards.

MAH types:

MAHX types:

MAQ types:

Helices for 1:1 and 2:1 systems (white color)

Helices for 4:1 and 2:1 systems (red color)

Quadro for all ratios 8green color)

Classic Mixers for C System Cardridges and machine Mixers

MSR types - rotary for low viscosities

STATOMIX® MR Series plastic disposable dynamic mixers are designed for use with meter, mix, and dispense equipment. The MR static mixer provides an inexpensive solution for the dynamic mixing of low viscosity,

MEH and MSH types - flexible inline mixers

STATOMIX® FM Series flexible in-line mixers were developed for 2-component varnishes and other low viscosity materials. The non-rigid mixer housing is made from a high strength nylon that is resistant to moisture absorption.

KS, SM and AE types

STATOMIX® KS Series steel/fibreglass mixers were developed as a low-cost alternative for mixing 2-component reactive resins. The mixing elements are made of a high-grade, solvent resistant plastic. A transverse rod supports the elements at the outlet end of the zinc-plated steel housing. Steel/fibreglass mixers are not suitable for the mixing of extremely high viscosity materials at temperatures above 80° C.

STATOMIX® SM Series stainless steel tube mixers are suited for mixing two-component reactive resin systems. These durable stainless steel mixers consist of alternating left and right hand helical elements, which are nickel brazed within the entire length of the tubular mixer housing. The mixer has to be cleaned immediately after use and it is recommended to briefly flush it with the main component only and then with a mixture of solvent/air. If partial or complete hardening of the components occurs, it can be burned out at 500° to 600° C.

STATOMIX® AE Series stainless steel tube mixers are fitted with removable elements and are designed for use with 2-component reactive silicone elastomers, silicone foams and resin systems with fillers where cleaning is not possible by burning out the mixer content. A retaining ring, positioned at the outlet end of the housing, supports the elements by means of the downstream part of the compression fitting. This type of mixer should be cleaned immediately after use and it is recommended to flush it with the main component only and then with a mixture of solvent/ air. Should further cleaning still be necessary, the elements may be removed and soaked in solvent.